4 – PARTEK TRIPLEX PUMPS HIGH PRESSURE WITH STAINLESS FLUID END

OVER 20 COMPLETE P-38 MCFARLAND TRIPLEX PUMP UNITS WITH 4 CYLINDER DEUTZ DEISEL ENGINES …

1- PARTEK TRIPLEX PUMP UNIT WITH DEUTZ 6 CYLINDER DIESEL ENGINE CLEAN COMPLETE UNIT…

TX – 150 UNION TRIPLEX PUMP COMPLETE 2.25″ PLUNGERS…

10-3/4 Eckel UHT Power Tong

72″ Base, 24″ Riser, 18″/24″ Stack, 60′ Tall, Sonic Flare Stack. Self Supporting, 90MMSCFD, Can be painted to your choice of color…

3/4 Phase Separators, Up to 2K working pressure, Up to 10′ Diameter x 40′ Long. Skid or Trailer Mounted, Single or dual dump lines, Flanged or Threaded Piping, Arctic Packages welcomed, All are built complete and ready to go to the field with crossovers. We will work with customers to design their equipment or we can suggest many different options to improve performance and to control costs.

24″ x 10′ S/S Cyclonic Sand Trap – 10K Cyclonic Design. 3″ 1502 Inlet/Outlet, 2″ 1502 Dump, 2″ 1502 Connection for PSV set at 9900 PSI, Mounted on L Skid, Complete with Paint and Data Book

2012 WEIR SPM Destiny TWS2500 Triplex Pump 10 inch stroke – 2500HP Power End Reconditioned – No Papers TWS2500 Fluid End – 4.5 inch plungers 15000 PSI Drive Assembly Quantity – One (1) Item Number: Triplex – 1 –

GARDNER DENVER PUMP UNIT W/ JOHN DEERE 475HP ENGINE (MODEL : TX-450HC) EXCELLENT CONDITION! 20,000PSI MAX PRESSUE

High/low pressure Testing unit 0-1,000psi/0-20,000psi. Hydroplex Triplex Pump powered by three phase 30HP Nidec Electric Motor.

Trailer 180k S&S Nitrogen Unit Detroit Series 60 14.0 L,665 HP Triplex pump. 3000 gal LN2 tank. 120,000sc , 15,000-psi Open operator console Treated Iron racks . Photo is stock, Photos and full specs available upon request.

TX-10 UNION TRIPLEX PUMP UNIT WITH SIEMENS ELECTRIC MOTOR (200GPM)…

PULSATION DAMPENER, 20 GALLON, 5,000 PSI W.P. WITH DISCHARGE STRAINER CROSS *WILL SELL AS IS OR CAN HAVE REPAIRED. SUBJECT TO PRIOR SALES….

KERR 3350 WITH 3″ PLUNGERS, S.S. FLUID END. DEUTZ 4 CYLINDER NATURAL GAS ENGINE.SKIDDED WITH AUTO START / STOP CONTROLS

10′ diameter x 12′ SS Free Water Knock Out 125 PSI (could be blanked off for pressurized tank or separator) 100% internally coated, externally primer coated. Accessories and concrete block provided. 1-Available

Gardner Denver TEE-BKA Well Service 2-1/2″ plunger cast steel single piece fluid end. Chain sprocket reduction drive. Also have one complete TEE with all interns and external oil pump. Good condition

New A.S.M.E. code and stamped, 60″ x 20′ x 720 # horizontal 3/phase separator, trailer mounted on a new 48′ x 102″, tandem axle dual wheel semi trailer with wood and steel deck, with Cameron meters or equivalent, Isolated and bypassed dump valves, suitable for sour gas operation or NACE operation, 4″ Daniels meter run or equivalent, all 600 ANSI flanged connections, Full documentation Financing Available With Approved Credit Subject to prior sale ! Delivery 10 weeks ARO * STOCK PHOTO SHOWN DOES NOT HAVE FLANGED CONNECTION

New well head compression and vapor recovery, Lower your casing head pressure and increase your production and profits, Stop fugitive emissions and increase your profits by vapor recovery in your stock tanks. One of the best and most reliable units on the marke

1 6 ft x 20 ft heater treat fresh out of the shop repaired and refurbished ready for controls and service 75 psi asme code valerus unit that is now repaired completely gone through,

Skid 1 24in x 20in 300 class pig launcher receiver Skid 2 8in x 6in 300 class pig launcher receiver Skid 3 24in x 20in 600 class pig launcher receiver Skid 4 16in x 12in 600 class pig launcher receiver Skid 5 16in x 12in 300 class pig launcher receiver Skid 6 16in x 12in 300 class pig launcher receiver Skid 7 16in x 12in 600 class pig launcher receiver Skid 8 8in x 6in 300 class pig launcher receiver All skids listed are new surplus

New 5,000# MAWP sand separators, 24″ x 7 6″‘ bare vessel, with 1502 inlet and outlet,ASME CODE, stress releived , suitable for sour gas service,, heavy L shaped oilfield type skid.

” 6 1/2 O.D. X 2 13/16 I.D. X 30.00 + SPIRAL DRILL COLLARS WITH 4 1/2 X-HOLE CONNECTIONS, WITH SLIP RECESS ONLY, COMPLETE WITH A NATIONAL OIL-WELL INSPECTION WITH PAPERS, AND COMPLETE WITH NEW THREAD PROTECTORS INSTALLED -STOCk

O.D. X 2 13/16″ I.D. X 31.00 SLICK DRILL COLLARS WITH 6 5/8 REGULAR CONNECTIONS, WITH SLIP RECESS ONLY, COMPLETE WITH MTR’S, AND COMPLETE WITH NEW THREAD PROTECTORS

4 3/4 O.D. X 2 1/4 I.D. X 31’ SPIRAL DRILL COLLARS WITH 3 1/2 I.F. CONNECTIONS, WITH SLIP RECESS ONLY, COMPLETE WITH A NATIONAL OIL-WELL INSPECTION WITH PAPERS, AND COMPLETE WITH NEW THREAD PROTECTORS INSTALLED (STOCK)

PULSATION DAMPENER 20 GALLON, 5,000 PSI W.P. WITH DISCHARGE STRAINER BLOCK *WILL SELL AS IS OR CAN HAVE REPAIRED. SUBJECT TO PRIOR SALE….

3- 125 series NLB 40,000psi triplex pump with 1 1/8 plunger and stainless steel fluid end 1-225 series NLB 10,000psi triplex pump…

Aqua Dyne Model: 2800A with 1-1/8″ Plungers and s.s. Fluid end . Includes Funk gear

6 1/4 inch OD x 2 1/4 inch ID x 31 ft. Slick drill collars,with 4 inch IF (NC 46) box x pin connections,threads cold rolled and phosphated,with bore back on box and stress relief groove on pin,with pressed steel thread protectors.

pony drill collar

1) 4-3/4″ OD in 10 FT ,15 FT & 20 FT lengths 2) 6-1/2″OD in 10 FT ,15 FT & 20 FT lengths 3) 8″OD in 10 FT ,15 FT & 20 FT lengths 4) 9-1/2″OD in 10 FT ,15 FT & 20 FT lengths With latest inspection reports.

9-1/2″ Spiral Drill Collars NEW with Mill Certs Manufactured by Thyssen Krupp 2) 6-1/2″ OD x 2-13/16″ ID Spiral Drill Collar, 91 lbs/ft , Range 2 with NC 46 (4 1/2″API XH) Box and Pin connections. Inspected (latest inspection reports available) NON CHINA MADE 3) 8-1/4″ OD X 2-13/16″ID Spiral Drill Collar, 160 LBS/FT , range 2 with 6 5/8″API REG Box and Pin connections. INSPECTED (with latest reports) NON CHINA MADE 4) 4-3/4″ OD X 2-1/4″ ID Spiral Drill collar -47 lbs/ft , Range 2 with NC 38 (3-1/2 API IF). Pin and Box connections INSPECTED NON CHINA MADE . 5) 8” O.D. Spiral Drill Collar

D-2636 (1) Drill Collar, Slick, 6-3/8″ OD x 2-3/8″ ID, 4-1/2″ XH Conn, SR, 29.79’L D-2637 (1) Drill Collar, Slick, 6-3/8″ OD x 2-3/8″ ID, 4-1/2″ XH Conn, SR, 30.95’L D-2638 (1) Drill Collar, Slick, 6-3/8″ OD x 2-7/16″ ID, 4-1/2″ XH Conn, SR, 30.71’L D-2899 (1) Drill Collars, Slick, 6-1/2″ OD x 2-5/16″ ID, 4-1/2″ XH Conn, HB, SR, 31.21’L D-2897 (6) Drill Collars, Slick, 6-1/4″ OD x 2-1/4″ ID, 4-1/2″ XH Conn, HB, 29.95’L D-2898 (2) Drill Collars, Slick, 6-3/8″ OD x 2-3/8″ ID, 4-1/2″ XH Conn, HB, SR, 29.70’L …

Drill Collars 4-3/4” spiral 3-1/2 IF Recess 43” Length 31 Feet plus Unused

Drill Collars 9-1/4″ and 9-3/4” spiral, Connection 6-5/8 Regular, Recess 43” Length 30 Feet plus

Drill Collars 8-3/8” and 8-1/4″ spiral, Connection 6-5/8 Regular, Recess 43” Length 30 Feet plus

sizes of bit subs, including premium HT,GPDS connection

Crossover subs

6-5/8″ R Pin X 4-1/2″ IF Box X/O 4-1/2″ IF Pin X 4″ IF Box X/O 4″ IF pin X 4″ IF pin X/O.

Spiral Drill Collar 6 1/2″ OD x 2 13/16″ ID, Premium Used DWB with API NC46 4 1/2″ Xhole Connections, with bore back & stress relief pin & box, Arnco Hardbanding, Comes with DS1 CAT5 Level Inspection Report with Shipment, Comes with HD plastic thread protectors and entire outer body coated with mill type corrosion resistant varnish and ready to use thread compund. Mfg as per API 5DP-7-1 specs. Origin: MADE IN USA Shipment / Delivery: Payment: 100% Bank Wire Transfer – Credit Terms Available With Approved Credit Terms & Finance Charges. VERY SPECIAL financing available for LATIN AMERICA – AFRICA – MIDDLE EAST. THESE HWDP AND ALL OUR LINE OF DRLL PIPES – HWDP – DRILL COLLARS – PUP JOINTS AVAILABLE

Pumpin sub w 4-1/16 10k flanges x-o to Bowen 4″ m/f connections, 1002 x 4″ side pumpin connections Flange to male Bowen connection with cap can also be lubricator tree cap.

cast steel thread protectors with lifting bails (lifting caps) which are made from steel castings from A216 WCB according ATSM (70.000 PSI tensile strength, 30.000 PSI yield strength) used for handling drill collars, drill bits, etc. Together with the cast steel thread protectors we supply Load Test Certificates for the safe working load . Thread Type Size Range IF 2 3/8″ – 4 1/2″ REG 2 3/8″ – 8 5/8″ FH 5 1/2″ – 6 5/8″ NC NC 35 – NC 61

wire line

SLICK LINE – MODEL SLIMLINE 6931035300V01 WPCE’S EQUIPMENT FOR WP 10 KPSI • 3 unit- Bop 10 Kpsi – ID 5.1/8″; upper connection Ø9″ – 4 Elmar box; Lower connection Ø 9″ – 4 Elmar pin. • 3 unit- Lubricator 10 kpsi – ID 5.1/8″ Length 20′; upper connection Ø6.1/8″ – 4 Elmar box; Lower connection Ø9″ – 4 Elmar pin. • 3 unit- Lubricator 10 kpsi – ID 5.1/8″ Length 8′; upper connection Ø 9″ – 4 Elmar box; Lower connection Ø 9″ – 4 thd Elmar pin • 18 unit- Lubricator 10 kpsi – ID 4.1/16″ Length 8′; upper connection Ø 6.1/8″ – 4×2 Elmar box; Lower connection Ø6.1/8″ – 4 thd Elmar pin • 3 unit- Sub Test 10 Kpsi – Ø 4.1/16″ • 3 unit- Quick Test Sub 10 Kpsi – Ø 5.1/8″ • 11 unit- Side Entry Sub 10 Kpsi – Ø 4.1/16″ • 11 unit- Tool Catcher 10 Kpsi – Ø 1″x1.3/4″ • 22 unit- Stuffing Box 10 kpsi – Ø 6.1/8″ • 11 unit- Test CAP 10 Kpsi – Upper Test CAP (Combined Quick Union Test Plug / Lift Bail Assembly) Ø 6.1/8″- 4 Elmar pin. • 11 unit- Test CAP 10 Kpsi – Upper Test CAP (Quick Union Test Cap Assembly) Ø 6.1/8″- 4 Elmar pin. • 11 unit- Test CAP 10 Kpsi – Lower Test CAP (Quick Union Test Cap Assembly With lower connection NPT 1/2 “) Ø 6.1/8″-4 Elmar box. • 3 unit- Test CAP 10 Kpsi – Upper Test CAP (Combined Quick UnionTeste Plug / Lift Bail Assembly) Ø 9″-4 Elmar pin. • 3 unit- Test CAP 10 Kpsi – Lower Test CAP (Quick Union Test Cap Assembly) Ø 9″-4 Elmar pin. • 6 unit- Lubricator dolly – 3 unit of Ø 5.1/8″ and 3 unit of Ø4.1/16″ • 3 unit- Stuffing Box Sheave 16″. • 6 unit- Composite Rigging Sheave 16″ • 13 unit- Pump Enerpac: 3 unit of 3 Kpsi; 7unit of 6,5 Kpsi; 3 unit of 10 Kpsi; • 10 unit- Hose. Quantity -7 unit 1/4″ 6 Kpsi with 1,71meters; 3 unit 1/4″ 10 K psi with 7,75meters SLING • 3 unit- Two-legged sling with 5.50 meters • 2 unit- Two-legged sling with 2.50 meters BHA EQUIPMENT • 54 unit- Stem / Sinker Bars 1.1/2″ X 2′, 1.1/2″ X 3′, 1.1/2″ X 5′, 1.7/8″ X 2′, 1.7/8″ X 5′, 2.1/8“ X 2’ , 2.1/8“ X 3’, 2.1/8“ X 5’, 1.7/8″ X 3′, 2.1/8“ X 2’ • 6 unit- Hydrostatic Bailer 1.500″, 2.125″ • 6 unit- Dump Bailers 1.500″, 2.125″, 2.620”. • 6 unit- Fluted Centralizers OD 2.72″ – DN 3″, 3.54″ – DN 4″, OD 2.72″ – DN 3″ ,OD 3.54″ – DN 4″ • 42 unit- Lead Impression Blocks 1.500 “,1.750″, 2.000″, 2.250″,2.500″, 2.625″, 2.750″2.875″, 3.250″, 3.500″, 3.593″, 4.750″. • 12 unit- Tubing Gauge Cutters 1.900″, 2.220″, 2.750″, 3.460″ • 45 unit- Knuckle Joints 1.1/2″ , 1.7/8″ ,2.1/8″ . • 36 unit- Blind Boxes 1.625″, 1.750″, 2.000″, 2.250″, 2.625″, 2.750″, 2.860″, 3.250″, 3.500″,3.593″, 3.780″, 3.850″. • 18 unit- Bowen Tubular Jars 1.1/2″ X 30″, 1.7/8″ X 30″, 2.1/8″ X 30″,1.1/2″ X 30″. • 15 unit- Running & Pulling Tool: GS 2″, GS 2.1/2″, GS 3″ ( core w/ thread 1.1/16″ UNSI), GS 3 1/2″, GS 4″. • 6 unit- Sliding Sleeve with no go: 3.62″ (nipple 3.56″)- 4 m x ID 3″, 3.72″. (nipple 3.68″) 4 m ID 3″ . • 30 unit- Slips GS 2.00″,GS 2.50″, GS 3.00, GS 3.00″, GS 3.50″,GS 4.00″. • 3 unit- Wireline Scratchers 1.1/2″ (With wire holes 0.092″). • 3 unit- Cross Over1.1/16″ UNS pin X 1.7/8”” QLS box • 8 unit- Cross Over1.1/16″ QLS pin X 15/16″ UNS CX. • 9 unit- Cross Over1.1/2″ QLS pin X 15/16″ UNS CX. • 3 unit- Cross Over 1.1/2″ QLS pin X 1.7/8″ QLS CX. • 9 unit- Cross Over 1.7/8″ QLS pin X 1.1/16″ UNS CX. • 3 unit- Cross Over 1.7/8″ QLS pin X 1.1/2″ QLS CX. • 9 unit- Cross Over 15/16″ UNS pin X 1.1/16″ UNS CX. • 6 unit- Shock Absorbers 1.7/8″, 2-18″….

SOLENOID VALVES – FIRE SUPPRESSION

August 6, 2017BAYPORE SINGAPOREautomobile, Co2, fire, foam, high speed, high temperature, latcing, n2, nitrosgen, on-off, proportional, solenoid, suppression, valveLeave a commentEdit

LATCHING SOLENOIDS

Solenoids and solenoid valves capable of holding in any position (up to three positions) without the constant application of electrical current utilize latching technology. Latching technology is well suited for battery operated applications.

ON-OFF SOLENOIDS

Solenoids and valves that use the constant application of current to move and/or hold in set positions. Devices can be controlled by peak and hold or PWM circuits. Our magnetic design allow our products to be reduced in size by as much as 25% over competitive designs.

PROPORTIONAL SOLENOIDS

Solenoids and valves that require accurate and repeatable control, low hysteresis, and a flat force vs. stroke curve. Proportional technology can be applied to fluid devices as well as position controls. Our unique solenoid features allow for a smaller package size for the same force requirement.

HIGH-SPEED SOLENOIDS

Solenoids and valves that require extremely accurate and high-speed control of fluids, position, or pressure. Our high-speed features allow for response times in as little as 200 microseconds.

HIGH-TEMPERATURE SOLENOIDS

Actuators, solenoids, and valves that require consistent performance under extremely high operating temperatures. Our high temperature technology offers proven operation in ambient temperatures exceeding 500°F (260°C).

SOLENOID VALVES

Valves that require on/off, proportional control, pressure reducing and relieving and flow controls. Our fluid control technology uses our unique magnetic design which allow for up to 25% reduced size over competitive designs.

UNDERWATER ACOUSTIC BEACON

August 5, 2017BAYPORE SINGAPORE37.5, acoustic, approved, baypore, beacon, buy, contact, Khz, pinger, singapore, UL, underwaterLeave a commentEdit

Standard features includes the following;

4″ Length Beacon with Field Replaceable Battery
Extended Useful Life
Designed to provide outstanding performance and reliability
Utilizes improved low voltage technology
Single cell, non-hazardous battery
Six years battery life
UL recognition, Solid cathode chemistry battery
Less active, more stable chemistry
High tolerance for rough handling
Manufactured to high quality design and test standards
Operational in water up to 20,000 feet
Sealed Unit

SPECIFICATIONS:

Operating Frequency:	37.5 kHz ± 1 kHz	Operating Depth:	Surface to 20,000′
Pulse Length:	Not < 9 milliseconds	Pulse Repetition Rate:	Not < 0.9 pulse per second
Useful Life:	6 years	Operating Life:	30 Days (min)
Acoustic Output Initial:	1060 dynes/cm2rms pressure @ 1 meter	Acoustic Output After 30 Days:	700 dynes/cm2rms pressure @ 1 meter
Operating Temperature:	28°F to 100°F	Actuation:	Fresh or salt water, surface to 20,000′
Radiation Pattern:	Rated output over 80% of sphere	Size:	1.3″ D x 4″ L
Weight:	Less than 7 oz (including battery)	Power Source:	Lithium Battery, Field Replaceable

RADAR REFLECTORS FOR SMALL BOATS AND VESSELS

August 5, 2017BAYPORE SINGAPOREboat, energy, naviagation, powerful, radar, radar reflector, reflector, safety, singapor, strong, yachtLeave a commentEdit

Rigid EchoMax Radar Reflectors

TITAN SERIES FLAMEPROOF HIGH PRESSURE SWITCH

August 4, 2017BAYPORE SINGAPOREfalmeproof, high, pressure, switch, titanLeave a commentEdit

TYPE PF263A1B/AX31F22C/67S3AA ‘TITAN’ SERIES FLAMEPROOF HIGH PRESSURE SWITCH

as detailed on forwarded data sheets and as below:

Switch body material:Black anodised aluminium alloy

Wetted parts:316 stainless steel with Nitrile seals.

Mounting:Surface via integral 2 hole fixing bracket.

Range :80 – 240 Bar g.

Setting : (customer to advise).

Max. working pressure : 700 Bar g.

Process connection : ¼” BSP.P Female

Electrical connection : M20 X 1.5 ISO

Microswitch : 1 x SPDT, Inductive rating 3A @ 30V dc / 5A @ 240V ac

Ingress protection : IP66

ATEX Certification: ATEX/IECEx CE Ex II2G Exd IIB+H2 T6…T2 Gb, Ta -60° to +40°C…+90°C

============================================

TYPE PF61AB/2X101/S1XB ‘PERSEUS’ SERIES FLAMEPROOF HIGH PRESSURE SWITCH

sheet herewith and as follows:

Construction:Switchcase-Black anodised aluminium alloy.

:Pressure housing -316 stainless steel.

:Element-316 st.st piston and Nitrile seal

Mounting : Surface via two through case fixing holes.

Range: 70 – 420 Bar

Setting : (customer to advsie)

Max. working pressure : 500 Bar

Process connection : ¼” BSP.P female

Electrical connection : M20 X 1.5 ISO

Microswitch(es) : 1 x SPDT, rated 2A @ 250 Vac / 3A @ 30 Vdc Inductive

FIRE DETECTOR

August 3, 2017BAYPORE SINGAPORELeave a commentEdit

802371 OPTICAL SMOKE DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

802374 O2T MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

805591 DETECTOR BASE WITH RELAY (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

SIGA-DH DUCT DETECTOR HOUSING (PARTS FOR FIRE ALARM SYSTEM)

XLS-PHS DETECTOR PHOTO/HEAT (PART FOR FIRE ALARM PARTS)

FIRE ALARM PART- FIRE DETECTOR MMD 130 EX-I MULTIPLE SENSORDETECTOR F.HAZARDOUS AREAS

HFPT-41 DETECTOR PKG, 500-033380 (PART OF FIRE ALARAM)

WFD30-2 WATER FLOW DETECTOR – TO BE USE IN FIRE APPLICATION

DZ-03-DETECTOR BASE(FIRE ALARM PARTS)(2000 NOS)

DETECTOR BASE 4-INCH, MODEL: FZBU004-AB4 (FIRE ALARM EQUIPMENT FOR PROITE FACTORY IN PUNE PROJECT)

ANALOG PROJECTED-BEAM PHOTOELECTRIC SMOKE DETECTOR (NON UL LISTED),MODEL:FDGJ002-D-X (FIRE ALARM EQUIPMENT FOR PROITE FA

BEAM1224 BEAM DETECTOR CONV SSD (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

I-9103 INTELLIGENT RATE OF RISE AND FIXED TEMPERATURE HEAT DETECTOR(FIRE ALARM PRODUCTS)

HEAT DETECTOR HEAD 116-BDH-300 (FIRE ALARM PARTS)

802374 O2T MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

SUPPLY OF FIRE DETECTION AND ALARM SYSTEM – ADDRESSABLE PHOTO-ELECTRIC SMOKE DETECTOR @ TRUE CEILING) SUPPLY OF ANALOG A

FP-11 DETECTOR PKG BPZ:500-095112 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

HFPT-11 DETECTOR PKG BPZ:500-033380 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

FIRE / OVER HEAT DETECTOR (AIRCRAFT PART USE FOR :-A-320-214, REG NO:-VT-WAK , SR.NO :- 3900.)

PARTS FOR FIRE ALARM SYSTEM – DETECTOR PKG

4098-9601 -SSD PHOTO DETECTOR (PART OF FIRE ALARM)

BEAM1224 BEAM DETECTOR CONV SSD (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

CO1224T CO DETECTOR W/TEST (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

BEAM1224 BEAM DETECTOR CONV SSD (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

B524IEFT-1, DETECTOR BASE FET ISOLATOR BASE STANDARD A MOSFET ISOLATOR BASE (FOR FIRE ALARM EQUIPMENT & ACCESSORIES)

IR FLAME DETECTOR DRD-E ( FIRE DETECTION EQUIPMENT )

INTELLIGENT MULTI- CRITERIA DETECTOR RMD-E-IN ( FIRE DETECTION EQUIPMENT )

BEAM1224 BEAM DETECTOR CONV SSD (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

517.050.041 4B DETECTOR BASE (PART OF FIRE ALARM)

330-399287 SHIELD DIODE 11-SERIES DETECTOR (PARTS OF FIRE ALARM SYSTEM)

FIRE OVER HEAT DETECTOR P/N 8891-48 AIRCRAFT PARTS FOR SCHEDULED AIRLINES

40M OF LINER HEAT DETECTOR ON STAINLESS STEEL MESSANGER WIREPROTECTOWIRE TYPE XCR-M 180 C (ACCESSORIES FOR FIRE-EXTINGU

LS-828-7PL-2 SMOKE DETECTOR (FIRE ALARM ACC.)

LS-828-7P SMOKE DETECTOR (FIRE ALARM ACC.)

FIRE ALARM PARTS- SIGA-PHS INTELLIGENT PHOTO/HEAT DETECTOR

FIRE ALARM PARTS- SIGA-PS INTELLIGENT PHOTO DETECTOR

PARTS FOR FIRE DETECTION EQUIPMENT – ADDRESSABLE HEAT DETECTOR (JAPAN)

INFRARED FLAME DETECTOR FDF241-9 A5Q00003006 100645059 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

BASE FOR FLAME DETECTOR FDFB291 A5Q00003310 100645066 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

FDB221-AA DETECTOR BASE (ADDRESSABLE) A5Q00012741 101296017 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

INTELLIGENT PHOTO/HEAT DETECTOR SIGA-PHS (PART OF FIRE ALARM SYSTEM)

INTELLIGENT SMOKE DETECTOR SIGA-DSI (PART OF FIRE ALARM SYSTEM)

INTELLIGENT PHOTO DETECTOR SIGA-PS (PART OF FIRE ALARM SYSTEM)

BEAM DETECTOR CONV SSD BEAM1224 (PART FOR FIRE ALARM SYSTEM)

DB721 DETECTOR BASE WITH LOOP CONTACT S54319-F11-A1 102467741 (PARTS FOR FIRE & SECURITY SYSTEM)

DB721 DETECTOR BASE WITH LOOP CONTACT S54319-F11-A1 (PARTS FOR FIRE & SECURITY SYSTEM)

DETECTOR FIRE PULON P/N 8891-48 AIRCRAFT PARTS FOR SCHEDULEDAIRLINES

B524IEFT-1, DETECTOR BASE FET ISOLATOR BASE STANDARD A MOSFET ISOLATOR BASE (FOR FIRE ALARM EQUIPMENT & ACCESSORIES)

802374 O2T MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

802373 OT MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

805590 STANDARD DETECTOR BASE FOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

802373 OT MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

802374 O2T MULTISENSOR DETECTOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

805590 STANDARD DETECTOR BASE FOR (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

803374.EX O2T MULTISENSOR DETECTOR EX (I) (FOR FIRE ALARM EQUIPMENT/ACCESSORIES)

DA-HE025 PLASTIC COMPONENT OF SMOKE DETECTOR GJA-A (CONV) WITH LED EXTENSION (PARTS FOR FIRE ALARM SYSTEM)

DA-HE025 PLASTIC COMPONENT OF HEAT DETECTOR CJA A (CONV) WITH LED EXTENSION (PARTS FOR FIRE ALARM SYSTEM)

435546 TERMINAL DETECTOR ASMBLY(PART OF FIRE FIGHTING EXTINGUISHING SYSTEM)

SIGA-HRS INTELLIGENT HEAT DETECTOR(PARTS OF FIRE ALARAM SYSTEM)

FIRE ALARM SYSTEM:- DETECTOR BASE CT3000 S-WHITE SDB3000 S WHITE (32242)

DETECTOR PHOTO/HEAT(PARTS FOR FIRE ALARM SYSTEM)

HEAT(ROR)DETECTOR(PARTS FOR FIRE ALARM SYSTEM)

DETECTOR PHOTO(PARTS FOR FIRE ALARM SYSTEM)

BPZ:500-095112 FP-11 DETECTOR PKG (PARTS OF FIRE ALARM SYSTEM)

BPZ:500-033380 HFPT-11 DETECTOR PKG (PARTS OF FIRE ALARM SYSTEM)

SIGA-PS INTELLIGENT PHOTO DETECTOR (Parts of Fire Alarm System)

SIGA-PS INTELLIGENT PHOTO DETECTOR (PARTS FOR FIRE ALARMSYSTEM)

SIGA-HRS INTELLIGENT HEAT DETECTOR (PARTS FOR FIRE ALARMSYSTEM)

SIGA-PS INTELLIGENT PHOTO DETECTOR (PARTS FOR FIRE ALARMSYSTEM)

EC-100R REFLECTIVE BEAM SMOKE DETECTOR(PARTS FOR FIRE ALARMSYSTEM)

DE-SD-5I INTELLIGENT HEAT DETECTOR (SPARE PARTS FOR FIRE ALARM SYSTEM)

HM-613DC-2 SMOKE+HEAT DETECTOR (FIRE ALARM ACC.)

XLS-HRS HEAT( ROR) DETECTOR (PARTS FOR FIRE ALARM SYSTEM )

XLS-PS DETECTOR PHOTO (PARTS FOR FIRE ALARM SYSTEM)

517.050.041 4B DETECTOR BASE (PART OF FIRE ALARM)

FP-11 DETECTOR PKG BPZ:500-095112 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

FDB221-AA DETECTOR BASE (ADDRESSABLE) A5Q00012741 101296017 (PARTS FOR FIRE ALARM & SECURITY SYSTEM)

HFPT-11 DETECTOR PKG, 500-033380 (PART OF FIRE ALARAM)

DETECTOR,DUAL IR:PN 516.038.004 – SPARES FOR FIRE AND GAS DETECTION SYSTEM (EXEMP AS PER SR.NO.45 OF LIST 15)

ITEM NO. 116BHH-320 SMOKE DETECTOR HEAD (PARTS OF FIRE ALARM SYSTEMS

ITEM NO. 116-BHH-300 SMOKE DETECTOR HEAD (PARTS OF FIRE ALARM SYSTEMS

ITEM NO. 116 BDH -300 HEAT DETECTOR HEAD (PARTS OF FIRE ALARM SYSTEMS

ITEM NO.116 BWA -100 DETECTOR BASE (PARTS OF FIRE ALARM SYSTEMS

FLAME DETECTOR IR FV-40 DETECTOR, – FIRE -4040R-212SF-US

PART OF FIRE ALARM SYSTEM – SUPPLYOF HEAT DETECTOR WITHBASE JUNCTION BOX AND OTHER ACCESSORIES – SIGA-PHS+SIGA-SB

435546 TERMINAL DETECTOR ASMBLY(PART OF FIRE FIGHTING EXTINGUISHING SYSTEM)

FIRE ALARM PARTS- SIGA-PHS INTELLIGENT PHOTO/HEAT DETECTOR

FIRE ALARM PARTS- SIGA-PS INTELLIGENT PHOTO DETECTOR

FIRE ALARM PARTS- SIGA-HRS INTELLIGENT HEAT DETECTOR

SIGA-HRS INTELLIGENT HEAT DETECTOR(FIRE ALARM PARTS)

FIRE DETECTOR WMX1000F90 EX SF-801299

FIRE DETECTOR FMX3511 CONSOLE 0.2SEC-902534

HFPT-11 DETECTOR PKG, 500-033380 PART OF FIRE ALARAM)

F 7110-HEAT DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

F 7120-HEAT DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

F 7130-OPTICAL DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

F 7160-COMBINED DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

DB 7100 DETECTOR BASE (PARTS FOR FIRE ALARM SYSTEM)

FD 8010 HEAT DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

FD 8020 HEAT DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

FD 8030 OPTICAL DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

FD 8060 COMBINED DETECTOR NO BASE (PARTS FOR FIRE ALARM SYSTEM)

DB8000 DETECTOR BASE (PARTS FOR FIRE ALARM SYSTEM)

(F.O.C ITEM) FIRE ALARM PRODUCTS.JTY-GD-G3 DETECTOR (SOMKE SENSING)

TERMINAL DETECTOR ASMBLY ITEM NO.435546 (PART OF FIRE FIGHTING EXTINGUISHING SYSTEM)

517.001.278 TESTIFIRE SMOKE &HEAT TESTER (FIRE DETECTOR)

516.850.055 851PH PHOTO -HEAT DETECTOR MARI (PART OF FIRE ALARM)

516.850.053 850H HEAT DETECTOR (PART OF FIRE ALARM)

516.800.007 811F MX FLAME DETECTOR (PART OF FIRE ALARM)

DETECTOR FIRE (P/N:9560129980)(AIRCRAFT ENGINE PARTS FOR DEFENCE USE)

DETECTOR FIRE (P/N:9560132140)(AIRCRAFT ENGINE PARTS FOR DEFENCE USE)

(PARTS FOR FIRE ALARM SYSTEM) OPTICAL SMOKE DETECTOR WITH SV