Echomax now offer the EM12 a popular corner 12inch ball reflector, for everyday or emergency use. The RORC recommend a mounting height of 4 metres above sea level or on small craft as high as possible. Mount in the catch rain position with the open corners facing the horizon. Mounting heights of 10-35 feet will give an approximate radar response between 4-7 nautical miles. In the catch rain position the EM12 gives a maximum RCS of 5.57m2 and an average RCS of 1.77m2.
- Meets ISAF rules 2015 and on USCG approved radar reflector list
- Optional extras: (sold separately)
- P.V.C 6” 1/14 TPI - adapter fits all VHF-GPS fittings
- Flange mount for direct cabin roof mount.
- Sailboat use: suspend from rigging in catch rain position.
Supplied as a flat pack for quick assembly and immediate use.
Packed dimensions are 13” x 13” and weighs just 730gms
(16.5 oz.)
EM18A flat packed 18” Octahedral corner reflector for emergency use.
The RORC recommend a mounting height of 4 metres above sea level or on
small craft as high as possible, mount in the catch rain position with the open
corners facing the horizon. Mounting heights of 10-35 feet will give an
approximate radar response between 4-7 nautical miles.
Packed dimensions are 13 x 13” and weighs 1.1kg
Mounted in the catch rain position the EM18 gives a maximum RCS of
10.66m2 and an average RCS of 3.42m2.
small craft as high as possible, mount in the catch rain position with the open
corners facing the horizon. Mounting heights of 10-35 feet will give an
approximate radar response between 4-7 nautical miles.
Packed dimensions are 13 x 13” and weighs 1.1kg
Mounted in the catch rain position the EM18 gives a maximum RCS of
10.66m2 and an average RCS of 3.42m2.
The EM180 has a documented maximum radar cross section of 8M2 and is suitable for vessels up to 7-8 metres. We have utilised the largest possible patented symmetrical stacked array with the smallest possible robust Polyethylene case with minimum windage and weight. The EM180 is suitable for deck, mast mount fixing, or halyard suspension and is available in white, orange or yellow. Used extensively on marine buoys and for tsunami warning buoys.
Dimensions:
- Height: 478mm (overall)
- Width: 197mm (overall)
- Fixing Centres: 435mm
- Fixings: 2 x 8mm stainless eyelets
- Weight: 1.4kg
For linear diagram click here
For mounting bracket click here
For mounting instructions click here
EM230 MIDI
The medium sized Echomax radar reflector with a maximum 20M2 radar cross section is suitable for 8-15 metres sailing yachts - see photos of this being suspended from the spreaders by Arc rally entrants at Las Palmas -RIBs and motor cruisers. Suitable for mast, deck bracket or halyard suspension. Fully tested by QinetiQ. Exceeds RORC/ORC/WCC/ISAF requirement of 10M2.
Available in white, orange, yellow, red, green or black.
@+/-3°-20m² peak, 75% @2.5m², 100% @1.25m²
Dimensions:
- Height: 450mm
- Width: 245mm
- Fixing centres: 408mm
- Fixing holes: 8mm
- Weight: 1.9kg
For polar diagram click here
For mounting bracket information click here
For mounting instructions click here
For line drawing click here
Adapted from the very successful big brother with high response of 8.3M2. Suitable for 6-9 metre fast fishing boats, solves the problem where to fit the radar reflector and the light.
Available with optional factory fitted :-
- Lalizas DOT all round navigation light (illustrated) or Tri-colour light supplied with 4M of cable.
- Hella LED 360 all round white supplied certified by RINA/USCG/IMO/NMMA to 2nm with 1M cable
- Orionis B LED with RINA certified to 2nm. Cable length to be specified.
- Fitting kit included
- Maximum response of 8.3M2 average 1.3M2.
- Width 245mm Height 268mm with light 340mm
- 150mm Base fitting with 4 x 6mm fixings @ 80mm centres
- Weight with light 1.6kg.
Just bolt on and wire up! Fit the QD Fitting whilst trailering to avoid damage caused by low obstacles such as trees, garage or barn entrances.
For linear diagram click here
Adapted from the very successful EM230 Compact with Maximum response of 23.38M2. Ideal for Ribs, land hazards, marina entrances, poles, buoys and fish farms. Built to support large Navigation lights such as Sealite and Carmanah.
Available with optional factory fitted extras :-
- Lalizas DOT all round navigation light or Tri-colour light supplied with 4M of cable.
- Hella LED 360 all round white supplied certified by RINA/USCG/IMO/NMMA to 2nm with 1M cable
- Orionis B LED with RINA certified to 2nm. Cable length to be specified.
- Sealite SL15
- Carmanah M550
- Fitting kit included
- Maximum response of 23.82M2 average 2.27M2.
- Width 300mm Height 320mm
- 150mm Base fitting with 4 x 6mm fixings @ 80mm centres
Just bolt on and wire up! Fit the QD Fitting whilst trailering to avoid damage caused by low obstacles such as trees, garage or barn entrances.
For linear diagram click here
For line drawing click here
Adapted from the very successful EM230 Compact with Maximum response of 23.38M2. Ideal for Ribs, land hazards, marina entrances, poles, buoys and fish farms. Built to support large Navigation lights such as Sealite and Carmanah.
Available with optional factory fitted extras :-
- Lalizas DOT all round navigation light or Tri-colour light supplied with 4M of cable.
- Hella LED 360 all round white supplied certified by RINA/USCG/IMO/NMMA to 2nm with 1M cable
- Orionis B LED with RINA certified to 2nm. Cable length to be specified.
- Sealite SL15
- Carmanah M550
- Fitting kit included
- Maximum response of 23.82M2 average 2.27M2.
- Width 300mm Height 320mm
- 150mm Base fitting with 4 x 6mm fixings @ 80mm centres
Just bolt on and wire up! Fit the QD Fitting whilst trailering to avoid damage caused by low obstacles such as trees, garage or barn entrances.
For linear diagram click here
For line drawing click here
Adapted from the very successful EM230 Compact with Maximum response of 23.38M2. Ideal for Ribs, land hazards, marina entrances, poles, buoys and fish farms. Built to support large Navigation lights such as Sealite and Carmanah.
Available with optional factory fitted extras :-
- Lalizas DOT all round navigation light or Tri-colour light supplied with 4M of cable.
- Hella LED 360 all round white supplied certified by RINA/USCG/IMO/NMMA to 2nm with 1M cable
- Orionis B LED with RINA certified to 2nm. Cable length to be specified.
- Sealite SL15
- Carmanah M550
- Fitting kit included
- Maximum response of 23.82M2 average 2.27M2.
- Width 300mm Height 320mm
- 150mm Base fitting with 4 x 6mm fixings @ 80mm centres
Just bolt on and wire up! Fit the QD Fitting whilst trailering to avoid damage caused by low obstacles such as trees, garage or barn entrances.
For linear diagram click here
For line drawing click here
EM230 basemount suitable for direct installation on wheel house roofs, RIB A frames, marker buoys. Robust four hole base fixing and supplied with fixing kit comprising of spacers to avoid over tightening and neoprene washers to absorb the shock of crashing down on waves at speed.
Chosen by the RNLI as best reflector for their fleet of 400 RIB's. After capsize tests and exhaustive sea trials, the Midi recorded 100% paints at 3.8 miles and 80% paints at 5 miles plus in sea state 'fair' although mounted only 2m above sea level. (RORC/ORC recommend 4m above sea level).
Available with optional factory fitted Lalizas DOT all round white or tri-colour navigation and four meters of cable or Hella LED 360 navigational all white light with 1 meter of cable – just bolt on and wire up!
All versions available in white, orange, yellow, red, green,or black.
Super strength magnetic base version also available for airside vehicles.
QinetiQ anechoic response see below
@+/-3°-20m² peak, 75% @2.5m², 100% @1.25m²
Dimensions:
- Height: 432mm (with fitted light - 540mm)
- Width: 245mm
- Base Diameter: 150mm
- Fixing Centres: 4x6mm bolts at 80mm pcd centres
- Weight: 2.3kg (with fitted light - 2.5kg)
For polar diagram click here
For mounting bracket information click here
For mounting instructions click here
For PDF fitting instructions click here
For line drawing click here
BASEMOUNT QD Adapter plates - Fit and remove in seconds! Enables the Extreme or Compact basemounts to be quickly removed from the cabin roof or A frame to avoid damage by trees or low objects when trailering or restrictive barn or garage entrances. Made from robust 3mm stainless plate with welded 12mm stainless fittings. 150mm diameter with 4 x 6mm fixings @ 80 mm centres Weight 0.9kg
**Please note the fixing kit which consists of the following 4 x 6mm x 50mm SS bolts – 4 x 6mm SS lock nuts - 4 30x2mm SS washers – 8 neoprene washers – 4 nylon inserts spacers is not supplied as part of the QD fitting as these are supplied with the reflector. This can be purchased as an optional extra.
Suitable for vessels 9 metres and above. Robust Polyethylene case available in white, orange, yellow, red, green, or black. . The EM230 model has been successfully tested by QinetiQ to ISO 8729-1999, and meets RORC,ORC,ISAF 2012/13 and WCC requirements of 10M2.
Echomax EM230 has now been allocated a NATO Stock No.5840-99-742-6193 following the adoption and use of the Echomax EM230 by the UK Military Forces and others throughout the World. Used by the US Navy for target and other uses.
The EM230 has Ships Wheel Mark certification for life boats and rescue craft as from December 2012 and copies of the BABT- TUV Module B certificate can be seen and downloaded from the Certificates section of this website.
Mast, halyard or deck bracket mount. Available in @+/-3°-24m² maximum - Stated Performance Level (SPL) +/- 3° 4.7m²
Dimensions:
- Height: 610mm
- Width: 245mm
- Fixing Holes: 8mm
- Weight: 2.3kg
- Fixing Centres: 569mm
For polar diagram click here
For target pattern map click here
For mounting bracket information click here
For mounting instructions click here
For line drawing click here
Available in Red, Green, or Black.
Black cases are not covered by the ships wheel mark as they are considered to conflict with other black mast head devices ie balls and cones
Restyled case with fixing centres of 545mm, being direct replacement for the Firdell Blipper 210-7 utilising existing bracket installation on mast. Same response as the EM230 above.
Now available with brown PE case for classic boat owners.
Dimensions:
- Diameter 245mm
- fixing centres 545mm
- Height 595mm
- Wt 2.3kgs
For line drawing click here
For mounting instructions click here
DuPont metallized, lacquered and spunbonded fabric array with PVC case. Folds down neatly to pocket size and is an ideal addition to the grab bag for emergency use. Can be mounted from halyards or with optional three piece glass fibre rod kit. Also suitable for dinghy or liferaft use.
Based on our rigid EM230 Midi and made using our own HF welding machines
- Length 510mm
- Diameter 300mm
- Wt 300grms
- Estimated maximum response 20m2
- 3 piece 60 cm Glass fibre mounting kit: 247gms
NB: The glass fibre rod fixing kit is an optional extra and is not supplied with the inflatable. A price for this set can be obtained from the dealer
www.baypore.com
No comments:
Post a Comment